Everything at hand
One set. Ready for board care.
Cutting board oil with natural waxes, plus the tools to care for your wooden boards. Together in one box.
Cutting board oil with wax · 250 ml
Cares for the wood and helps protect the surface against moisture.
Brush
For applying a thin, controlled coat of oil.
Sponge
For spreading the oil evenly.
Cloth
For wiping off excess oil.
Sandpaper
For gently smoothing rough areas when needed.
Oil + natural waxes
Care within the wood. Protection at the surface.
NAMTURE hardwax oil cares for your board from within and renews its protective surface finish. The oil penetrates the wood, bringing out its natural colour and grain. Natural waxes create a smooth, water-repellent finish that helps protect against moisture and water stains.
Care and protection in one product, based on natural ingredients and free from solvents.
NAMTURE hardwax oil
Give your board more than oil.
Nourish the wood and renew its water-repellent protective finish in one treatment.
| The difference | NAMTURE hardwax oil | Standard mineral oil |
|---|---|---|
| Formula | Oil + natural waxes | Pure mineral oil |
| Protective layer | Extra water-repellent wax layer | No wax layer |
| Oil and wax | In one treatment | Apply wax separately |
Compared with pure, food-grade mineral oil without added wax.
Your trusted board. Looking its best again.
Slide to see the difference after a NAMTURE treatment.
After everyday use
Light knife marks and wood that looks dry and dull.
Ready for some care
The natural wood colour has faded.
After everyday use
Light knife marks and wood that looks dry and dull.
Ready for some care
The natural wood colour has faded.
After NAMTURE treatment
Knife marks are barely noticeable. The wood colour looks rich and lively again.
Cared for and protected again
The oil nourishes the wood; the wax renews its protective layer.
BeforeAfter
After NAMTURE treatment
Knife marks are barely noticeable. The wood colour looks rich and lively again.
Cared for and protected again
The oil nourishes the wood; the wax renews its protective layer.
How to care for your board
Refresh your board in 4 steps.
Lightly sand the clean, dry board, then remove all dust. Apply a thin, even layer of oil with the brush and wait 2 minutes. Gently work the oil into the surface with the sponge and wait another 5 minutes. Wipe off all excess oil with the cloth. Let the board dry completely before using it again.
Care every 1–2 months
Treat your board roughly once a month to once every 2 months, depending on use and cleaning. If the wood feels dry, looks duller or absorbs water more readily before then, give it a treatment sooner.
Keep wood beautiful
Wash your board by hand, dry both sides immediately and allow it to air-dry. Do not soak it or put it in the dishwasher.
Frequently asked questions about the care set
Why choose NAMTURE hardwax oil?
NAMTURE combines nourishing oil with natural waxes. The oil penetrates the wood; the wax creates an extra water-repellent protective layer on the surface. Care for and protect your board in one treatment. Pure mineral oil contains no wax: a wax layer requires a separate product.
What does the protective wax layer do?
The natural waxes remain on the surface, creating a smooth, durable finish. This layer helps resist moisture and water stains. A care treatment renews the protection that gradually wears with cutting and cleaning. Wash your board by hand and dry it straight away.
Can I make knife marks less visible?
Yes, light knife marks can become much less noticeable after treatment. Gently smooth rough or more marked areas first with the included sandpaper. Remove the dust and treat the dry wood with NAMTURE hardwax oil to refresh its colour and finish. Deep cuts need more sanding; oil alone does not fill them.
Is the oil food-safe and what can I use it on?
Yes. The formula is developed for wooden kitchenware that comes into contact with food. Suitable for wooden cutting boards, tapas boards and serving boards. Allow the finish to dry fully as instructed on the label before using the board again.
How do I treat my board?
Lightly sand the clean, dry board, then remove all dust. Apply a thin, even layer of oil with the brush and wait 2 minutes. Gently work the oil into the surface with the sponge and wait another 5 minutes. Wipe off all excess oil with the cloth. Let the board dry completely before using it again.
How often should I oil my board?
As a guide, treat your board once a month to once every 2 months, depending on how often you use and clean it. If the wood feels dry or rough, its colour looks duller or water soaks in more quickly before then, treat it sooner. A thin maintenance coat revives the wood and renews the protective finish.
How many care treatments can I get from 250 ml?
For one L board (33 × 24 × 2.5 cm), 250 ml provides an estimated 13–18 care treatments; for all three boards in the set (M, L and XL) together, approximately 4–6 treatments. With monthly care, that is about a year or longer for one L board. For the full set, it is around 4–6 months, or 8–12 months when treated every 2 months. This calculation allows for one thin coat on both sides and the edges. Drier wood and extra coats can increase consumption.
What is in the complete care set?
Food-safe hardwax oil based on natural ingredients (250 ml), a brush, sponge, cloth and sandpaper. Everything you need to care for your wooden cutting and serving boards.
What does it cost when ordered with a board?
The separate price is € 34,99. When purchased with an eligible wooden board or cutting board set, the care set costs € 29,99. The €5 discount is applied automatically in your cart.